Choice of sealed glass unit
At Fenexart, we use sealed glass unit made by Robover. The seal glass unit is made of two windows, separated by the Swisspacer interlayer.
At Fenexart, we priviliged the Swissspace interlayer. This feature eliminates plastic wedges that often cause gas leak and vapour penetration between the lenses. With a single seal, as is the case at Robover, the life of the insulating glazing is always optimal.
As the interlayer is an essential element in the manufacturing of insulating glazing, it must possess precise qualities. In terms of argon retention, energy saving, sealing and aesthetics, Fenexart retains the best products.
The Swisspacer spacer has been manufactured in Switzerland since 1998 and exported around the world. The Swisspacer Ultimate is made from a fibreglass reinforced composite material that makes it highly insulating.
Confort
Grâce aux caractéristiques d’isolation supérieures du SwisspacerMD, les températures sur le verre sont plus élevées et le rayonnement froid est diminué. Le risque de condensation et de moisissures insalubres s’avère réduit. SwisspacerMD vous assure un climat plus sain pour plus de confort dans votre foyer.
Esthétique
Offert en noir, gris, blanc et brun foncé, le Swisspacer est doté de coins pliés plutôt qu’encochés, pour ne former qu’un seul joint des plus étanches. Qui plus est, sa finition mate est impeccable.
Garantie un aspect attrayant, sans aucun effet métallique brillant.
Fiabilité
Une mince feuille d’acier inoxydable est fixée à l’endos du matériau composite ce qui garantit l’étanchéité aux gaz de remplissage et à la vapeur d’eau. Celle-ci permet également une excellente adhérence du scellant. Les coins de l’intercalaire SwisspacerMD sont pliés et non encochés, ce qui ajoute à la fiabilité.
Certification IGMAC
Les vitrages isolants fabriqués avec le Swisspacer Ultimate ont été soumis non pas une, mais deux fois au test CAN/CGSB-12.8 de certification IGMAC et ont de nouveau dépassé les exigences des normes de performance des vitrages isolants remplis d’argon. Cela le place donc sur l’échiquier mondial comme le meilleur intercalaire à bordure chaude.
Would you like to know how much your next renovations will cost?
ONLY COMPLETE THE FORM
The Énergiverre seal glass unit
The seal glass unit is made of two windows, separated by the Swisspacer interlayer.
The thermos has a Low-E coating with argon gas compliant with Star Energy standards.
It allows to conserve the maximum solar gain inside for a reduction in heating costs.
The Climativerre seal glass unit
The seal glass unit is made of two windows, separated by the Swisspacer interlayer.
The thermos has a Low-E coating with argon gas compliant with Star Energy standards.
It allows to conserve the maximum solar gain inside for a reduction in heating costs.
The Acoustiverre seal glass unit
The seal glass unit is made of two windows, separated by the Swisspacer interlayer.
Its creation makes it possible to absorb more noise from the outside.
Promotes optional peace of mind compare to the Énergiverre and Acoustiverre seal glass unit.
The Acoustiverre seal glass unit is more efficient in terms of noise reduction (STC) than another regular.
The Tripleverre seal glass unit
The seal glass unit consist of 3 windows with 2 Swisspacer dividers.
Can have low-E argon gas.
Provides superior insulation to cold and noise.
| PERFORMANCE OF INSULATING GLAZING WITH GLASS PPG | ||||
| Made of 3 mm glass and 12.7 mm spacers | ||||
| R factor | Solar gain | Transmitted light | ||
| DOUBLE GLAZZING | ||||
| 2 clear glasses + air | 2 | 0.75 | 81% | |
| 1 clear glass and 1 Low-E glass + argon | 3.6 | 0.68 | 79% | |
| TRIPLE GLAZZING | ||||
| 3 clear glasses + air | 3.1 | 0.67 | 74% | |
| 2 clear glass and 1 Low-E glass + argon | 5.3 | 0.61 | 71% | |
| 1 clear glass and 2 Low-E glass + argon | 6.9 | 0.55 | 69% | |
Our Aluminart manufacture, for 47 years, assembles windows in Quebec. Fenexart is a trademark belonging to and representing the 4 branches of the Aluminart group.
NEW
SWISSPACERMD LAUNCHES THE ULTIMATE :
THE BEST HOT BORDER INTERLAYER IN THE WORLD
The SWISSPACER ULTIMATE sets a new benchmark for energy efficiency, comfort and dimensional stability. Whatever the climate, its exceptional insulating properties ensure the optimum performance of windows of all shapes, which translates into energy savings.
With the SWISSPACER Ultimate, SWISSPACER is once again able to reduce by more than 20% the thermal conductivity of the best product currently available, the SWISSPACER V.
To know more on the SWISSPACER ULTIMATE :
